Useful Beginner Advice When Using An Electric Conduit Bender
The primary purpose of an electric conduit bender is to manipulate conduits to certain angles. It reduces labor and enhances safety. If you're using an electric conduit bender as a beginner, here is some advice to consider carefully.
Determine the Appropriate Bend
Before you start manipulating conduit materials with an electric bender machine, it's important to first identify the type of bending that needs to take place. There are some staple bends in the electrical field, such as 45 and 90-degree angles.
Being able to identify the proper bend prior to using an electric conduit bender ensures you can prepare the conduit materials correctly. You'll know what adjustments to make and how far to go with the electrical bender each time it's needed to get conduits at a certain angle.
Account for Flexing
When you bend conduit materials with a bender, sometimes the materials can bend back. This is known as flexing, and it happens a lot with conduit materials. If you can accurately estimate how much flexing will occur, then it will be a lot easier to use a conduit bender optimally so that the right angle is achieved.
You need to take into account the materials of the conduits that you're bending and then perform some practice bends. Then you can see exactly how much the material bends back and thus how far you need to go when using a conduit bender. These practices will save you from having to make additional bends and adjustments.
Take Care of the Motor
The part that makes an electric conduit bender so special is the motor. It's key in powering this system to make conduit bending an easy and safe task. You just need to make sure this component is well taken care of so that you can get the most out of an electric conduit bender for years.
Make sure you know what the motor's limits are so that you don't go past them. Also see how you're supposed to lubricate this component in order to keep it from overheating because of severe friction. These easy steps can help you avoid a lot of motor trouble.
Electric conduit benders can be used to automate the conduit bending process, saving you both time and a lot of potential mistakes. If you take your time using this machine and know what protocols to follow when bending conduits with it, you'll create better bends in a shorter period of time.